One more cycle of fill and sand, and the fairing should be done.
Sabtu, 17 Desember 2016
Langganan:
Posting Komentar (Atom)
Popular Posts
-
With the first forward panel dry-fit, and the Raptor staples sanded off the transom, the next tasks ahead of me were: Decide how to finish t... -
Rudder is now under way. Took a while to draw the layout lines from the plans and then scribe a reasonable curve. Bought reading glasses t... -
I ordered the mast tubes from B+B yacht design. They come in 8 sections, with the two lower sections being reamed out for a perfect fit. T... -
We finally had a few days of nice weather, and a day with no other projects on tap. So, I decided to take the boat out of the garage and fl... -
Todays blog post is about assembling the stem for my Glen-L Zip. The Zips stem, as with many Glen-L designs, is made from two identically sh... -
I made a common mistake when I installed the chines. Sure, Id read about the possibility of making this mistake beforehand. However, I obvio... -
Ken Hankinsons excellent book, "How to Fiberglass Boats," suggests radiusing the hard edges of the hull in order to properly apply... -
The ten foot yurt has had a few outings in the past few years. It worked well but I thought it could use a little more floor space in condi... -
Finally, the time came to attach the remaining 7 feet of planking to the port side. I prepared for this on a Saturday afternoon, removing a... -
All android studio shortcuts list for android developers. windows linux mac. free. ...
0 komentar:
Posting Komentar