Finally ripweights come in handy. ut the seat framing and glued to the bulkheads. The center bulkheads are tabbed both sides.
Kamis, 07 Juli 2016
Langganan:
Posting Komentar (Atom)
Popular Posts
-
With the first forward panel dry-fit, and the Raptor staples sanded off the transom, the next tasks ahead of me were: Decide how to finish t... -
I ordered the mast tubes from B+B yacht design. They come in 8 sections, with the two lower sections being reamed out for a perfect fit. T... -
The ten foot yurt has had a few outings in the past few years. It worked well but I thought it could use a little more floor space in condi... -
I made a common mistake when I installed the chines. Sure, Id read about the possibility of making this mistake beforehand. However, I obvio... -
Rudder is now under way. Took a while to draw the layout lines from the plans and then scribe a reasonable curve. Bought reading glasses t... -
Progress on the yurt continues. Much of the progress is imperceptible to anyone but myself but the progress is there. As it turns out, my ... -
It used to be that the only way to get your memoir published was to be a famous person or an interesting writer or to have such an interesti... -
How To DIY Plans UK USA Australia homemade boat lift plansI have a sixty-six century 16ft woods boat I deficiency to build angstrom unit ind...
-
"Ford thwart"... or "forward thwart." The front seat , in other words. ( This nautical terminology thing is fun ). In an... -
I dont want to make too much of the making of and sitting by campfires mainly because it is something that most people who go camping have p...
0 komentar:
Posting Komentar